A- Maximum dump angle: 60°
B- Reach at 60' dump angle: 12.50" (317 mm)
C- Reach at 45° dump angle: 17.50" (444 mm)
D- Clearance at 59° dump angle: 51.00" (1,295 mm)
E- Clearance at 45° dump angle: 53.00" (1,346 mm)
F- Height to bucket hinge pin: 78.00" (1,981 mm)
G- Fully raised operating height: 94.00" (2,388 mm)
H- Bucket roll back: 18°
J- Digging depth, bucket flat: 3.00" (76 mm)
K- Backhoe Digging depth: 92.00" (2,337 mm)
L- Backhoe Undercut: 30.00" (762 mm)
M- Digging radius from pivot center: 112.00" (2,845 mm)
Swing arc from pivot center: 180°
N- Loading height - bucket at 60°: 68.00" (1,727 mm)
O- Loading reach - bucket at 60°: 41.00" (1,041 mm)
P- Maximum transport height: 72.00" (1,828 mm)
Q- Transport overhang: 39.50" (1,003 mm)
R- Wheelbase: 48.00" (1,219 mm)
S- Length - bucket to rear tire: 98.50" (2,501 mm)
Overall trailering length LBH: 156.00" (3,962 mm)
Overall trailering width LBH: 60.00" (1,524 mm)
T- Overall trailering length L: 107.00" (2,717 mm)
Overall trailering width L: 49.00" (1,244 mm)
Bucket at 180°: 130.00" (3,302 mm)

ENGINE
Make: Kohler, 4 cycle air-cooled V twin with overhead valves and full pressure
Engine Model: CH20
Horsepower: 20 at 3600 rpm (14.9 kw)
Bore & Stroke: 3.03" x 2.64" (77 mm x 67 mm)
Displacement: 38 cu. in. (624 cc)
Block: Aluminum with cast iron cylinder liners
Fuel: Unleaded gasoline
Air Cleaner: Dual element (replaceable)
Oil Filter: Full flow, spin on, can type (replaceable)
Ignition: Electronic Inductive
Battery: 300 CCA
Alternator: 15 amp

POWER TRAIN
Transaxle: Dual range, cast iron, automotive differential
Steering: Hydraulic power
Front Axle: Hilliard 4-wheel drive
Brakes: Band and drum
Parking Brake: Hand set

PRESSURE RELIEF SETTINGS
Traction Control: 3000 PSI (20,670 KPa)
Power Steering: 1800 PSI (1 2,402 KPa)
Loader Control: 1800 PSI (12,402 KPa)

HYDRAULIC SYSTEM
Pump type: Double gear
Port #1: 4.7GPM (17.8 LPM)
Port #2: 8.7 GPM (32.9 LPM) 3600 RPM & 3000 PSI (20,670 KPa)
Control Valve Mono-cast, 2 spool series
Braking Valve: Dynamic, pilot-operated, spool type
Motor Type: Gerotor, low speed, high torque & efficiency

OIL
Recommended: SAE 2OW-40 motor oil
Oil Cooler: Air cooled radiator
Oil Reservoir: 2.04 gallon (7.7 L)

TRAVEL SPEEDS
Low Range: 0-3.0 MPH (4.8 km/h) forward & reverse
High Range; 0-5.4 MPH (8.7 km/h) forward & reverse

LOADER
Power: Hydraulic
Control Valve: mono-cast 2 spool single lever operation for lift & dump; positive hold & float position
Loader Lift Cylinders: 2" bore (51 mm), 18.1" stroke (459 mm), 1" diameter rod (25.4 mm) double acting
Bucket Cylinders: 2.5" bore (63.5 mm), 13' stroke (330 mm), 1.25' diameter rod (31.7 mm) double acting
Bucket Capacity: 4.7 cu. ft. (1.33 m3) struck
Bucket Width: 48" (1,219 mm)
Loader Lift Capacity: 938 lb. (425.5 kg) at max. operating height

TIRES
Front Backhoe: 23 x 8.50-12 4 ply
Rear 29 x 12.50-15 4 ply high flotation

FLUID CAPACITIES
Fuel Tank: 6.4 gal. (24.2 L)
Hydraulics: 5. 0 gal. (18.9 L)
Engine Oil with Filter: 2.0 qts. (1.9 L)
Transaxle: 2.0 qts. (1.9 L)

BACKHOE
Cylinders
Boom: 2.5" (63.5 mm) bore
Dipperstick: 2.5" (63.5 mm) bore
Bucket: 2.0" (50.8 mm) bore
Stabilizer: 2.5" (63.5 mm) bore
Swing: 2.5" (63.5 mm) bore

Bucket Capacity
8 inch: 0.71 cu. ft (0.20 m3)
12 inch: 1.44 cu. ft (0.41 m3)
16 inch: 1.66 cu. ft (0.47 m3)
18 inch: 1.93 cu. ft (0.55 m3)
24 inch: 2.73 cu. ft (0.77 m3)

Digging Force
Dipperstick: 1780 lbs. (807.4 kg)
Bucket: 2600 lbs. (1,179.3 kg)
Bucket Teeth: Hensley bolted

ATTACHMENTS
Standard
Loader & LBH: Ammeter, electric hour meter, 4-wheel drive light switch
Loader: Hydraulic PTO, 3 point hitch
Optional
Loader: Pallet forks, ROPS, Hydraulic Tools

WEIGHT
7020 L: 1,620 lbs. (735 kg)
7020 LBH: 3,040 lbs. (1,379 kg)